Dodge Charger 5 Inch Exhaust Tips, Black

(1 customer review)

$ 169.99

5 inch black exhaust tips for the 2017–2023 V8 Dodge Charger (R/T, Scat Pack, SRT) and the 2015–2023 Charger Hellcat. Ceramic coated black over 304 stainless steel, sized to fill the round exhaust openings in your bumper. Direct bolt-on with your factory collar clamps: no cutting or welding required. Sold as a pair.

1 Item sold in last week
Description

5 Inch Dodge Charger Exhaust Tips

These 5 inch black exhaust tips are made for the round exhaust openings in the lower bumper of the V8 Dodge Charger. The factory tips look small in those openings. Ours fill them, so the back of the car looks finished and a lot meaner. They fit every 2017–2023 Charger R/T, Scat Pack and SRT, and every 2015–2023 Charger Hellcat.

They are a direct bolt-on. You take off the stock tips, slide ours on and tighten the factory collar clamps. No cutting, no welding, and about 1 hour for both sides.

Key features

  • 5 inch outlet: sized to fill the round cut-outs in the Charger’s lower bumper.
  • Ceramic coated black finish: heat resistant and corrosion resistant, for the blacked-out look.
  • 304 stainless steel: the same grade most good aftermarket exhausts use, so it resists rust and road salt.
  • Direct bolt-on: reuses the factory collar clamps. No cutting, welding or drilling.
  • Sold as a pair: one tip for each side.

Note: collar clamps are not included. You reuse your factory clamps.

Fitment by year and trim

These tips fit your Charger only if your lower bumper has a round exhaust opening on each side from the factory. Use this table to check your car.

ChargerEngineFits?
2017–2023 R/T5.7 Hemi V8Yes
2017–2023 Scat Pack6.4 (392) Hemi V8Yes
2017–2023 SRT 3926.4 (392) Hemi V8Yes
2015–2023 SRT Hellcat (incl. Redeye and Jailbreak)6.2 supercharged Hemi V8Yes

Not sure if they fit your Charger? Send us a message with your year and trim and we will check it for you.

Installation (about 1 hour)

You can reach everything from under the rear bumper, so most owners do this in the driveway. You need an angle grinder, a socket wrench and maybe some penetrating oil if the clamps are rusty.

  1. Let the exhaust cool. Tips get very hot after a drive. Wait at least an hour.
  2. Grind off the spot weld on the factory clamp. From the factory, each collar clamp is held in place with a small spot weld. Grind it off with an angle grinder so the clamp can be loosened. Wear safety glasses and gloves.
  3. Loosen the factory collar clamp on one side and slide the stock tip off the pipe. Keep the clamp.
  4. Slide the new tip on and line it up so it sits centered in the bumper opening, at the depth you like.
  5. Tighten the clamp firmly, then repeat on the other side.
  6. Check after your first drive. Make sure both tips are still straight and the clamps are tight.

Our tips vs stock and other brands

The stock tips work fine. They just look small in the bumper, which is why so many owners swap them. We make ours in ceramic black, because it matches a blacked-out rear end and doesn’t show heat discoloration the way polished steel does.

Finish the look

Black tips look best with darker tail lights. Our pre-cut tail light tint for the 2015–2023 Charger goes on in about 30 minutes, and you can see every part we make for the car in our Dodge Charger accessories. Own a Challenger too? We make black quad exhaust tips for the Dodge Challenger.

Frequently asked questions

Do these fit a V6 Charger (SXT or GT)?

No. The 3.6 V6 Charger has no round exhaust openings in the lower bumper and uses different pipes, so these 5 inch tips have nothing to sit in. They fit the 2017–2023 V8 Charger (R/T, Scat Pack, SRT) and the 2015–2023 Charger Hellcat.

Do they fit a 2015 or 2016 Charger?

Only the 2015–2016 Hellcat. The other 2015–2016 V8 Chargers (R/T, Scat Pack, SRT 392) have a different exhaust, because Dodge upgraded the V8 exhaust for 2017, so the tips don’t fit them.

Do they fit the Charger Widebody?

Yes. They fit the 2020–2023 Charger Scat Pack Widebody and SRT Hellcat Widebody.

How do these compare to Carven exhaust tips?

Carven makes a well-known replacement tip set for the V8 Charger. Ours work the same way: a direct bolt-on 5 inch tip that reuses your factory collar clamps, with no cutting or welding required. Ours come in a ceramic black finish over 304 stainless steel, fit the 2017–2023 V8 Charger and the 2015–2023 Charger Hellcat, and usually cost less, with free US shipping.

Do I need to cut or weld anything?

No welding or cutting of the pipes. The only extra step is grinding off the small factory spot weld on each collar clamp, so the clamp can be loosened. Then you remove the stock tips and slide ours on with the same factory clamps.

Are clamps included?

No. You reuse the two factory collar clamps that hold your stock tips on. They are in good shape on almost every car, so there is nothing extra to buy.

Will the black finish fade or burn off?

The tips are ceramic coated, a heat-resistant finish made for exhaust parts, over 304 stainless steel. Like any exhaust tip they collect soot, so wash them with car soap and a soft brush now and then. Avoid acid wheel cleaners and abrasive pads, which wear any coating faster.

How do these compare to the stock Scat Pack tips?

The stock tips look small inside the big round bumper openings. Our 5 inch tips are sized to fill those openings, so the back of the car looks finished. They mount the same way as the stock tips, with the same clamps.

Additional information
Compatible with:

2017-2023 Dodge Charger V8

Reviews (1)
5
1 review
1
0
0
0
0

1 review for Dodge Charger 5 Inch Exhaust Tips, Black

Clear filters
  1. CaliKid96 –

    Slapped these 5 inch exhaust tips on my R/T Charger. Super easy to install, and they sit perfectly flush like they were born to be there. If you want your Charger looking like it just ate a stang for breakfast, these are the tips for you. 10/10!

Add a review

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Shipping & Delivery

Do you offer free shipping?

Yes, shipping is completely free when your order is at least $35.

Where do you ship to?

We ship to the 48 Continental United States.

What are the shipping options?

We offer Standard and Expedited shipping. Standard is between 1-5 days and Expedited is between 1-2 days.