Dodge Challenger Quad Exhaust Tips, 4 Inch Black

$ 189.99

Black quad exhaust tips for the 2017–2023 V8 Dodge Challenger (R/T, Scat Pack, SRT 392) and the 2015–2023 Challenger Hellcat. Two 4 inch outlets per side, ceramic coated black over 304 stainless steel. Direct bolt-on with your factory collar clamps: no cutting or welding required. Left and right tips included.

9 Items sold in last week
Description

Quad Exhaust Tips for Dodge Challenger

These black quad exhaust tips are made for the V8 Dodge Challenger. Each side gets a tip with two 4 inch outlets, sized to fill the exhaust openings in the rear bumper for a blacked-out, aggressive look. They fit every 2017–2023 V8 Challenger (R/T, Scat Pack, SRT 392) and the 2015–2023 Challenger SRT Hellcat.

They are a direct bolt-on. You take off the stock tips, slide ours on and tighten the factory collar clamps. No cutting, no welding, and about 1 hour for both sides.

Key features

  • Quad style, two 4 inch outlets per side: fills the bumper openings of the V8 Challenger.
  • Ceramic coated black finish: heat resistant and corrosion resistant, for the blacked-out look.
  • 304 stainless steel: the same grade most good aftermarket exhausts use, so it resists rust and road salt.
  • Direct bolt-on: reuses the factory collar clamps on the stock exhaust. They can also be welded onto an aftermarket system.
  • Left and right included: one tip for each side.

Note: collar clamps are not included. You reuse your factory clamps.

Fitment by year and trim

ChallengerEngineFits?
2017–2023 R/T and R/T Scat Pack (incl. T/A)5.7 or 6.4 (392) Hemi V8Yes
2017–2023 SRT 3926.4 (392) Hemi V8Yes
2015–2023 SRT Hellcat (incl. Redeye)6.2 supercharged Hemi V8Yes

The tips fit cars with the factory exhaust. If you have an aftermarket exhaust, they can be welded on by an exhaust shop. Not sure about your car? Send us a message with your year and trim and we will check it.

Installation (about 1 hour)

You can reach the clamps from under the rear bumper, so this is a driveway job. You need an angle grinder, a socket wrench and maybe some penetrating oil if the clamps are rusty.

  1. Let the exhaust cool. Wait at least an hour after a drive.
  2. Grind off the spot weld on the factory clamp. From the factory, each collar clamp is held in place with a small spot weld. Grind it off with an angle grinder so the clamp can be loosened. Wear safety glasses and gloves.
  3. Loosen the factory collar clamp on one side and slide the stock tip off. Keep the clamp.
  4. Slide the new tip on (check left and right) and line both outlets up level and centered in the bumper opening.
  5. Tighten the clamp firmly, then repeat on the other side.
  6. Check after your first drive that both tips are still level and the clamps are tight.

Hellcat, Scat Pack and R/T: same tips

Every 2017–2023 V8 Challenger and the 2015–2023 Challenger Hellcat use the same bolt-on tip setup at the back, so the same set fits the R/T, the Scat Pack and the Hellcat. That makes these an easy Hellcat or Scat Pack exhaust tip upgrade: the car keeps its factory exhaust and sound, and the rear gets the blacked-out look.

Finish the look

Pair the tips with our pre-cut tail light tint for the 2015–2023 Challenger for a fully blacked-out rear end, or browse every Dodge Challenger accessory we make. Own a Charger too? We make 5 inch black exhaust tips for the Dodge Charger.

Frequently asked questions

Do these fit a Hellcat?

Yes. They fit every 2015–2023 Challenger SRT Hellcat, including the Redeye, as well as the 2017–2023 R/T, Scat Pack and SRT 392.

Do they fit a V6 Challenger (SXT or GT)?

No. The 3.6 V6 Challenger has a different exhaust and rear bumper, so these quad tips don’t fit it.

Do they fit a 2015 or 2016 Challenger?

Only the 2015–2016 Hellcat. The other 2015–2016 V8 Challengers (R/T, Scat Pack, SRT 392) have a different exhaust setup, so the tips don’t fit them.

Are clamps included?

No. You reuse the factory collar clamps that hold your stock tips on, so there is nothing extra to buy.

Are the left and right tips included?

Yes. You get a left and a right tip. Each one has two 4 inch outlets, so together they give the car its quad tip look.

How do they compare to the stock quad tips?

They mount the same way as the stock tips, with the same clamps. The difference is the look: two 4 inch outlets per side in a ceramic black finish that fill the bumper openings for a blacked-out rear end.

Can I use them on an aftermarket exhaust?

Yes, but not as a bolt-on. On an aftermarket system they can be welded on by an exhaust shop.

Additional information
Compatible with:

2017-2023 V8 Dodge Challenger

Reviews (0)
0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Dodge Challenger Quad Exhaust Tips, 4 Inch Black”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

Shipping & Delivery

Do you offer free shipping?

Yes, shipping is completely free when your order is at least $35.

Where do you ship to?

We ship to the 48 Continental United States.

What are the shipping options?

We offer Standard and Expedited shipping. Standard is between 1-5 days and Expedited is between 1-2 days.