Guides

Dodge Charger Wheel Fitment Guide: Bolt Pattern, Lug Nut Size, Offset and Stock Wheel & Tire Sizes by Year

Dodge Charger bolt pattern and wheel fitment guide: black wheel filling the flared rear fender of a red Dodge Charger Widebody

Buying new wheels, putting on a set of winter tires or just doing a tire rotation at home? Then you need a few numbers first: the Dodge Charger bolt pattern, the lug nut size and the right torque. In this guide we cover all of them for the 2015–2023 Charger, from the V6 SXT to the Hellcat Widebody.

We start with the bolt pattern, then the lug nuts and the torque for your year and trim. After that we cover the stock wheel and tire sizes for every trim, wheel offset, the jack points and the upgrade sizes that fit.

Dodge Charger bolt pattern (2006–2023): 5×115

The bolt pattern (also called the lug pattern) tells you two things: how many wheel studs your hub has and the diameter of the circle they sit on. “5×115” means five studs on a 115 mm circle. Every Charger from the 2006 model year to the end of the 2023 run uses the same 5-lug pattern, from the V6 SXT to the Hellcat Redeye:

Model yearsGenerationBolt pattern
2006–2010LX, the first four-door Charger5×115 mm
2011–2014LD, before the facelift5×115 mm
2015–2023LD facelift (SXT to Hellcat, Widebody included)5×115 mm
2024 and laterCharger Daytona and SixpackA different car on a new platform. This guide doesn’t cover it.

Because the pattern never changed, a wheel from a 2008 Charger bolts onto a 2022 Charger. Whether it actually fits is a different question: width, offset and brake clearance decide that, and we cover those further down. Rear-wheel drive and all-wheel drive cars share the same bolt pattern too, but AWD cars need wheels with a different offset.

Is the Charger bolt pattern 5×114.3?

No. 5×114.3 is the pattern on many Fords, Hondas, Nissans and Toyotas, and some charts round the Charger’s 5×115 down to it. The two circles differ by less than a millimeter, so a 5×114.3 wheel may even slide onto the studs. The lug nuts then pull the studs sideways and never seat properly, and that is how wheels work loose. The mistake we see most is someone buying a set of “close enough” 5×114.3 wheels. Buy wheels made for 5×115, and skip the “wobble” or floating-seat lug nuts that claim to fix the gap. The Charger is not 5×120 either: that pattern belongs to cars like the Camaro.

Do Challenger and Chrysler 300 wheels fit a Charger?

The Challenger and the Chrysler 300 of the same years share the Charger’s 5×115 pattern and 71.5 mm hub bore, so their wheels bolt on. Before you buy a used set, check that the width and offset are close to your own wheels (a Challenger Widebody wheel, for example, sticks out on a regular Charger) and that an AWD car only gets AWD wheels.

Close-up of the black front wheel on a yellow Dodge Charger Widebody, five lug nuts on the 5x115 bolt pattern

New wheels change the whole look of the car, and the rear is usually next. Our 5-inch black exhaust tips go great with dark wheels. They fit every 2017–2023 V8 Charger and the 2015–2023 Charger Hellcat, Widebody cars included, and bolt on with the factory clamps. Our Dodge Charger exhaust guide explains what else changes the sound and look of the rear.

Pair of ceramic-coated black 5-inch exhaust tips for the 2017-2023 V8 Dodge Charger

GridReady product

Dodge Charger 5-inch Black Exhaust Tips

  • Fits 2017–2023 V8 Charger (R/T, Scat Pack, SRT) and the 2015–2023 Charger Hellcat
  • Ceramic-coated black over 304 stainless steel
  • Bolt-on with the factory clamps, no cutting or welding required

See price & details

Dodge Charger lug nut size, thread and torque spec

Every 2015–2023 Charger uses the same lug nut size:

Lug nut spec2015–2023 Charger
Thread sizeM14 x 1.50 (14 mm stud, 1.5 mm thread pitch)
Socket size22 mm, six-sided deep wall socket
SeatCone-shaped end that faces the wheel (conical seat)
Quantity20 per car, 5 per wheel

The lug nuts always go on with the cone-shaped end toward the wheel. Most aftermarket wheels for the Charger use the same conical seat, but some use a different one, so check what your wheel maker asks for. If you need new lug nuts or wheel locks, McGard, Gorilla and Dorman all make lug nuts and wheel locks for the Charger.

Dodge Charger lug nut torque

This is the one spec that changes with the trim and the year, so make sure you use the right number for your car:

Model yearTrimLug nut torque
2015–2022SE, SXT, GT, R/T and Scat Pack (Widebody included)130 ft-lb
176 N·m
2023SXT, GT, R/T and Scat Pack (Widebody included)148 ft-lb
200 N·m
2015–2023SRT 392, SRT Hellcat, Redeye and Jailbreak111 ft-lb
150 N·m

Yes, the 2023 number really is higher: 148 ft-lb for every 2023 non-SRT Charger, and the 2023 Chrysler 300 got the same change. Before that it never changed: 130 ft-lb for every non-SRT Charger from 2015 to 2022. The SRT number stayed at 111 ft-lb from 2015 all the way to 2023, so a 2023 Hellcat still uses 111, not 148.

How we tighten them:

  1. Thread all five nuts on by hand first, so none of them cross-threads.
  2. Snug them in a star pattern (skip one nut each time) with the wheel just touching the ground.
  3. Lower the car fully and torque each nut with a torque wrench in the same star pattern. Go round twice.
  4. Check the torque again after about 25 miles (40 km).

An impact gun is fine for taking the nuts off, but not for the final tightening. Too much torque stretches the studs and can warp the brake rotors, and too little lets the wheel work loose.

Dodge Charger hub bore and wheel studs

The hub bore (center bore) is the hole in the middle of the wheel that slides over the hub. On the 2006–2023 Charger it is 71.5 mm, and some charts round it up to 71.6 mm. The hub, not the lug nuts, is what centers the wheel, so the fit matters:

  • Factory and replica wheels have a 71.5 mm bore and are hub-centric: they sit tight on the hub with no extra parts.
  • Aftermarket wheels are often machined with a bigger bore so one wheel fits several cars. Ask for a pair of hub-centric rings (71.5 mm inside, your wheel’s bore outside). Without them the wheel relies on the lug nuts to center it, which is the usual cause of a vibration at highway speed after new wheels go on.
  • A bore smaller than 71.5 mm won’t go over the hub at all, so that wheel doesn’t fit.

The wheel studs match the lug nuts: M14 x 1.50. If a stud gets damaged or stretched (usually from an impact gun), replace it before you drive on that wheel. A replacement stud is pressed in from behind the hub and is a cheap part.

Dodge Charger stock wheel and tire sizes by year and trim

These are the standard wheels and tires for every 2015–2023 trim. All factory setups are “square”: the same size front and rear. If a package changed the wheels, it has its own row.

TrimYearsStock wheelStock tire
V6 cars: SE, SXT and GT
SE2015–201617-inchP215/65R17
SE AWD2015–201719 x 7.5P235/55R19
SXT2015–201718 x 7.5235/55R18
SXT2018–202317 x 7P215/65R17
SXT Plus201818 x 7.5235/55R18
SXT AWD2015–202319 x 7.5235/55R19
SXT with a 20-inch wheel package (Rallye, Blacktop and others)2015–202320 x 8245/45R20
GT2019–202320 x 8245/45ZR20
GT AWD2018–202019 x 7.5235/55R19
GT AWD2021–202320 x 8245/45ZR20
V8 cars: R/T, Scat Pack and Daytona
R/T2015–201820 x 8245/45R20
R/T2019–202320 x 8245/45ZR20
R/T Road & Track2015–201620-inch245/45ZR20
Daytona (5.7 HEMI)2017, 2020–202120 x 9245/45ZR20
R/T Scat Pack / Scat Pack2015–202320 x 9245/45ZR20
Scat Pack with Dynamics Package2018–202020 x 9.5 forged275/40ZR20
Daytona 3922017–2019, 202220 x 9.5275/40ZR20
SRT cars (narrow body)
SRT 3922015–201820 x 9.5 forged275/40ZR20
SRT Hellcat2015–201920 x 9.5 forged275/40ZR20
Widebody cars
Scat Pack Widebody2020–202320 x 11305/35ZR20
SRT Hellcat, Redeye and Jailbreak Widebody2020–202320 x 11305/35ZR20
Police
Pursuit AWD2020–202118 x 7.5 steelP225/60R18 (245/55R18 optional)

A few things worth knowing about this table:

  • The letters in the tire size. In 245/45ZR20, 245 is the tire width in millimeters, 45 is the sidewall height as a percentage of that width, and 20 is the wheel diameter in inches. The “Z” is a speed rating for very fast tires, so 245/45R20 and 245/45ZR20 fit the same wheel.
  • Not sure which wheels your car has? The tire placard on the driver’s side B-pillar (the body post behind the front door) or on the edge of the driver’s door lists the original tire size and pressures.
  • Optional wheels. Many cars left the factory with an optional wheel in a different finish but the same size. If your car has 20s and the table says 17s or 18s, it probably has one of the 20-inch packages.

Spare tire or tire service kit

Many SXT cars came with a compact spare tire under the trunk floor, with the jack and lug wrench stored underneath it. One rule surprises a lot of people: when a label on the spare says so, the compact spare may only go on a rear wheel. With a flat front tire, you put the spare on the rear, then move that rear wheel to the front. Many SRT cars have no spare at all and carry a tire service kit (sealant and a small compressor) in the trunk instead.

Dodge Charger wheel offset: stock, AWD and Widebody

Offset is the distance between the wheel’s mounting face and the center line of the wheel, in millimeters. A higher positive offset (for example +24) pulls the wheel further into the fender. A lower or negative offset pushes it out toward the fender lip. Get it wrong and the tire rubs the strut on the inside or the fender on the outside.

These are the factory offsets for the most common Charger wheels. For a 20 x 9.5 or wider aftermarket wheel, always double-check with the wheel maker for your trim.

Factory wheelTrimsFactory offset
17 x 7, 18 x 7.5, 20 x 8 (RWD)SXT, GT, R/TAbout +24 mm
20 x 9.5SRT 392, Hellcat, Daytona 392, Dynamics PackageAbout +18.5 mm
20 x 11All Widebody carsAbout −2.5 mm
19 x 7.5 and 20 x 8 AWD wheelsSE, SXT and GT AWDAbout +53 to +55 mm

What fits without rubbing

  • Narrow-body RWD cars (SXT to Scat Pack, Hellcat up to 2019): the factory range is roughly +18 to +24 mm, on wheels from 7 to 9.5 inches wide. Dodge itself fitted 20 x 9.5 wheels with 275/40ZR20 tires to the SRT 392, the narrow-body Hellcat and the Scat Pack Dynamics Package, so that combination is a safe upgrade for a narrow-body R/T or Scat Pack. Wider than that, measure first, especially on a lowered car.
  • AWD cars: AWD Chargers use wheels with a much higher offset, so RWD wheels are the wrong choice here even though the bolt pattern matches. Dodge even calls them “AWD wheels”. Buy wheels that are sold for the AWD Charger.
  • Widebody cars: the 20 x 11 wheel sits about 40 mm (1.6 inches) further out per side than the 20 x 9.5 wheel, to fill the wider fenders. On a regular-body Charger it sticks out past the fender, so Widebody wheels only belong on Widebody cars.
Red Dodge Charger Widebody on black wheels at a gas station at night, wide fender flares over the wheels

Dodge Charger jack points and how to lift a Charger safely

The Charger has four jack points, one near each wheel, on the pinch weld under the side of the car. The pinch weld is the vertical metal seam that runs along the bottom of the body under the side sill cover.

This is how to change a wheel safely with the factory jack:

  1. Park on firm, level ground, set the parking brake, put the transmission in PARK and switch the hazard lights on if you are near traffic.
  2. Block the wheel diagonally opposite the one you are lifting (wheel chocks or a brick).
  3. Loosen the lug nuts about one turn while the wheel is still on the ground. On wheels with a center cap that covers the nuts, pry the cap off carefully first.
  4. Put the jack under the jack point closest to the wheel and turn it until the saddle sits firmly on the pinch weld. If the car is too low for the jack to fit, slide the jack in on its side and rotate it upright under the jack point.
  5. Lift only as high as you need to take the wheel off.
  6. Fit the wheel, run the lug nuts on with the cone end toward the wheel, lower the car and then torque them.

The factory jack is for changing a tire only, so never get under a car that is only on the jack. For anything more (brakes, suspension, a full set of wheels), we use a floor jack with a slotted rubber pad that fits over the pinch weld, so the seam doesn’t get bent flat, and put the car on jack stands before any work starts. Always lift on the metal seam, never on the plastic side sill cover. If you want the whole car in the air, a shop with a two-post lift is the safe option.

Common Dodge Charger wheel and tire upgrade sizes that fit

The safest upgrades are sizes Dodge already put on another Charger trim. They bolt on, clear the body, and your speedometer stays accurate. The aim is to keep the overall tire diameter close to stock, because a different tire size makes the speedometer and odometer read wrong.

UpgradeForWhat to know
20 x 8 with 245/45R20SXT and GT RWD on 17s or 18sThe size Dodge used on the R/T and the 20-inch SXT packages. Expect a slightly firmer ride than on the 17s.
20 x 9.5 with 275/40ZR20R/T and Scat Pack (narrow body)The factory SRT 392, narrow-body Hellcat and Dynamics Package size. A wider tire for more grip, with the same overall diameter as a 245/45R20.
20 x 11 with 305/35ZR20Widebody cars onlyThe factory Widebody size. Sticks out past the fenders on a regular-body Charger.
22-inch wheels with 255/30R22 or 265/30R22Narrow-body RWD carsPopular for looks. The ride gets harsher and the lower sidewall offers less protection against potholes. Check brake clearance and offset with the wheel maker.
Smaller drag wheels with drag radialsScat Pack, SRT 392 and HellcatCommon for the drag strip. The Brembo brakes on these cars set the smallest wheel you can fit, so buy from a maker that lists your brake package. Weld, Race Star and Forgestar make popular drag wheels.

How the overall diameter compares (the stock 245/45R20 is 28.7 inches tall):

Tire sizeOverall diameterDifference vs 245/45R20
215/65R17 (stock SXT)28.0″−2.4%
235/55R18 (stock 2017 SXT)28.2″−1.8%
235/55R19 (stock AWD)29.2″+1.7%
245/45R20 (stock R/T, Scat Pack)28.7″0
275/40R20 (stock SRT, Hellcat)28.7″−0.1%
305/35R20 (stock Widebody)28.4″−1.0%
255/30R2228.0″−2.3%
265/30R2228.3″−1.5%

Compare against the stock size for your own trim, not just the 245/45R20, and stay within about 3% of it. For tires, the Michelin Pilot Sport 4S, Pirelli P Zero and Continental ExtremeContact are popular summer choices. For drag radials, Mickey Thompson and Nitto are the names we hear most.

Two more things before the new wheels go on:

  • Tire pressure sensors. Every 2015–2023 Charger has tire pressure monitoring. Have the shop move the sensors from your old wheels or fit new ones, otherwise the warning light stays on.
  • Lug nuts. Check that your new wheels take the factory conical-seat lug nuts. If not, order the right ones with the wheels.

New wheels change the side view the most, and the rear is usually next. Our pre-cut tail light tint for the 2015–2023 Charger goes on dry in about 30 minutes with the tail lights still on the car. You’ll find the rest in our Dodge Charger parts and accessories, and our Dodge Charger mods and accessories guide covers the mods that are worth the money, from cheap looks to horsepower.

Pre-cut dark tail light tint overlays and a yellow 2015-2023 Dodge Charger with tinted tail lights

GridReady product

Dodge Charger Tail Light Tint Kit

  • Fits every 2015–2023 Charger, SXT to Hellcat
  • Pre-cut dark vinyl with air-release channels
  • Squeegee, towel, practice pieces and install instructions included

See price & details

FAQ

What is the bolt pattern on a Dodge Charger?

Every 2006–2023 Dodge Charger has a 5×115 bolt pattern: five lugs on a 115 mm circle. It is the same on RWD and AWD cars and on every trim from the SXT to the Hellcat Widebody. The 2024 and later Charger Daytona is a different car and is not covered here.

What size lug nuts does a Dodge Charger use?

The 2015–2023 Charger uses M14 x 1.50 lug nuts with a 22 mm socket size and a conical seat, 20 per car. They go on with the cone-shaped end toward the wheel.

What is the lug nut torque on a Dodge Charger?

The torque is 130 ft-lb (176 N·m) for the 2015–2022 SE, SXT, GT, R/T and Scat Pack, 148 ft-lb (200 N·m) for the 2023 SXT, GT, R/T and Scat Pack, and 111 ft-lb (150 N·m) for every 2015–2023 SRT model (SRT 392, SRT Hellcat, Redeye and Jailbreak). Tighten in a star pattern and check again after about 25 miles.

What is the stock tire size on a Dodge Charger R/T?

The 2015–2023 Charger R/T has 20 x 8 wheels with 245/45R20 tires (rated 245/45ZR20 from 2019). The Scat Pack uses the same tire size on a wider 20 x 9 wheel.

What offset fits a Dodge Charger?

On a narrow-body RWD Charger, factory wheels sit at about +18 to +24 mm, and a 20 x 9.5 wheel around +18 mm with 275/40R20 tires fits like the factory SRT setup. AWD Chargers need AWD wheels with a much higher offset of about +53 to +55 mm. Widebody cars use 20 x 11 wheels at about −2.5 mm.

Where are the jack points on a Dodge Charger?

On the pinch weld (Dodge calls it the sill flange) under each side of the car: one just behind each front wheel and one just ahead of each rear wheel. Lift on the metal seam, never on the plastic sill cover, and use jack stands before working under the car.

One thought on “Dodge Charger Wheel Fitment Guide: Bolt Pattern, Lug Nut Size, Offset and Stock Wheel & Tire Sizes by Year”

Leave a Reply

Your email address will not be published. Required fields are marked *